Wire ultrasonic cleaning machine is widely used in our life. Do you know how the ultrasonic cleaning machine works for cleaning circuit boards? Now let's give you a detailed introduction. Hurry to follow us to learn about it.

1.半水清洗技術

1. Semi water cleaning technology

半水清洗采用以有機溶劑和去離子水為主的清洗劑，外加定量的活性劑和助劑。這種清洗方式介于溶劑清洗和水清洗之間。所有這些清洗劑都是有機溶劑，易燃溶劑，火花比較大，毒性較小，線路板超聲波清洗機使用相對安全，但要用水清洗和干燥。

Semi water cleaning uses cleaning agents based on organic solvents and deionized water, plus quantitative activators and additives. This cleaning method is between solvent cleaning and water cleaning. All these cleaning agents are organic solvents, flammable solvents, with large sparks and low toxicity. The circuit board ultrasonic cleaning machine is relatively safe to use, but it should be cleaned and dried with water.

2.水清洗技術；水清洗技術是未來清洗技術發展的方向，需要設立純水水源及廢水處理車間。以水為清洗介質，向水中加入表面活性劑、添加劑、防腐蝕劑等，形成一系列含水清洗劑。可去除電路板水溶劑和非極性污染物。

2. Water cleaning technology; Water cleaning technology is the development direction of cleaning technology in the future, which requires the establishment of pure water sources and wastewater treatment workshops. With water as the cleaning medium, surfactants, additives, corrosion inhibitors, etc. are added to the water to form a series of aqueous cleaning agents. It can remove water solvents and non-polar pollutants from circuit boards.

線材超聲波清洗機

Wire ultrasonic cleaning machine

3.免清洗技術；清灰過程使用非海上助焊劑或非海上泥漿。線路板超聲波清洗機直接進入下一個進程，電路板將不再被清理。今天，清潔技術是常用的替代，特別是移動通信產品，基本上是免費的。更換ODS的清洗方法。

3. Cleaning free technology; Non offshore flux or non offshore slurry is used in the ash removal process. The circuit board ultrasonic cleaning machine directly enters the next process, and the circuit board will no longer be cleaned. Today, clean technology is a common alternative, especially mobile communication products, which are basically free. Replace the cleaning method of ODS.

4.溶劑清洗技術；溶劑清洗主要是用溶劑溶劑來去除電路板污染物。由于揮發速度快，清洗溶劑的溶解度高，線路板超聲波清洗機要求簡單。

4. Solvent cleaning technology; Solvent cleaning mainly uses solvent to remove pollutants from circuit boards. Due to the fast volatilization speed and high solubility of cleaning solvent, the requirements of circuit board ultrasonic cleaning machine are simple.

線材超聲波清洗機利用超聲波在高頻率下轉化為電機能量，作用于液體介質，產生空化，形成并爆裂無數微氣泡，沖擊物體表面，去除表面污漬，起到清洗作用。由于液體的作用，與液體接觸的物體的表面被沖洗而不會留下死角。此外，線路板超聲波清洗機可以同時作用于多個對象的各個表面，非常快速。清潔通常需要15分鐘。使用線路板超聲波清洗機的另一個優點是，它能有效去除氧化，提高墊和零件銷的剃須能力，并減少電磁干擾。

Wire ultrasonic cleaning machine uses ultrasonic wave to convert into motor energy at high frequency, acts on liquid medium, produces cavitation, forms and bursts countless microbubbles, impacts the surface of objects, removes surface stains, and plays a cleaning role. Due to the action of the liquid, the surface of the object in contact with the liquid is washed without leaving a dead corner. In addition, the circuit board ultrasonic cleaning machine can act on all surfaces of multiple objects at the same time, which is very fast. Cleaning usually takes 15 minutes. Another advantage of using circuit board ultrasonic cleaning machine is that it can effectively remove oxidation, improve the shaving ability of pads and parts pins, and reduce electromagnetic interference.

以上就是為大家介紹的有超聲波清洗設備的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://m.czxhwj.com

The above is a detailed introduction of ultrasonic cleaning equipment for you. I hope it can help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://m.czxhwj.com